Porta-JACK Pro

Porta-JACK Pro Review

See more picture

Porta-JACK Pro Feature

• Tightens and holds flooring strips in place for nailing
• Straightens crooked or bowed flooring strips
• Rated for 1.5 tons of force
• Removable shoe (patented) for placement in the field of the flooring
• Ergonomic design

The Porta-Jack Pro floor tightening jack is designed to tighten and hold flooring strips in place for nailing. Straightens crooked or bowed flooring strips and holds in place for nailing. Ergonomic design, rated for 1.5 tons of force. With its removable s

Check price now

Porta-Nails 47080 16 Gauge 2-Inch Stainless Steel Flooring Nails (1,000 per Box)

Porta-Nails 47080 16 Gauge 2-Inch Stainless Steel Flooring Nails (1,000 per Box) Review

See more picture

Porta-Nails 47080 16 Gauge 2-Inch Stainless Steel Flooring Nails (1,000 per Box) Feature

• Stainless Steel nail for use with application requiring a non-corrosive nail
• Approved for use on ACQ treated materials
• Cupped point which virtually eliminates splitting even with very hard species.
• Well defined barbs to prevent the floor from moving
• 1000 nails will nail approximately 200 square feet of tongue and groove flooring

Nails approx. 200 Sq.Ft. of 2-1/4 strip flooring.

Check price now

Powernail Model 50 P Flex 18 Gauge Flooring Nailer

Powernail Model 50 P Flex 18 Gauge Flooring Nailer Review

See more picture

Powernail Model 50 P Flex 18 Gauge Flooring Nailer Feature

• Weight 11lbs
• Capacity 100 nails
• Operating Pressure 70-110psi
• Air Inlet 3/8"

The Powernail Model 50P FLEX air powered tongue and groove wood flooring nailer drives 1" to 1-3/4" leg 18 gauge L shaped flooring nails. A fully adjustable foot allows for precise height adjustments to fit a wide variety of floor thicknesses. No need for extra shims or pads. Additional features include a no-mar flooring shoe, safety trigger, cast aluminum body and foot, pressure sealed body, and aluminum nail channel. This Powernail 18 gauge flooring nailer is excellent for 3/8" to 5/8" flooring applications and also recommended for certain 3/4" exotic hardwoods including brazilian cherry and bamboo. Thinner 18 gauge fasteners offer superior holding power while reducing the risk of splitting.

Check price now

Trademark Tools 75-6401 Hawk Ultimate Comfort Blue Foam Flooring, 16-Square Feet

Trademark Tools 75-6401 Hawk Ultimate Comfort Blue Foam Flooring, 16-Square Feet Review

See more picture

Trademark Tools 75-6401 Hawk Ultimate Comfort Blue Foam Flooring, 16-Square Feet Feature

• 2-ft x 2-ft foam-rubber floor tiles that you easily put together in any combination
• Cushioning 3/8-Inch-thick pads are tough and durable Water-resistant and a breeze to clean
• Jig-saw edge notches hold together even under heavy traffic
• Textured slip-resistant surface Set of four interlocking padded tiles
• One set covers 16 sq ft

75-6401 Features: -Foam flooring.-Anti-fatigue padded flooring.-2' x 2' Foam-rubber floor tiles that you easily put together in any combination.-0.38'' Thick pads are tough and durable.-Water-resistant and a breeze to clean.-Jig saw edge notches hold together even under heavy traffic.-Textured slip-resistant surface.-Set of four interlocking padded tiles. Construction: -Comfortable and tough construction for excellent wear that saves your feet, legs and back. Color/Finish: -Simple to put together in any shape and color pattern to cover heavy traffic areas or an entire room. Specifications: -One set covers 16 square feet. Dimensions: -Dimensions: 24'' H x 24'' W x 2'' D. Warranty: -30 Day warranty.

Check price now

Hardwood Flooring Nailer for Installing Wood Floors - Bamboo, Oak, Maple, Brazilian Cherry, Hickory, Walnut, Hand Scraped, Prefinished and Engineered Wood Flooring

Hardwood Flooring Nailer for Installing Wood Floors - Bamboo, Oak, Maple, Brazilian Cherry, Hickory, Walnut, Hand Scraped, Prefinished and Engineered Wood Flooring Review

See more picture

Hardwood Flooring Nailer for Installing Wood Floors - Bamboo, Oak, Maple, Brazilian Cherry, Hickory, Walnut, Hand Scraped, Prefinished and Engineered Wood Flooring Feature

• Hardwood flooring nailer (Hardcore Tools® Brand) light weight cast aluminum, colors may vary!
• Operates with any standard compressor between 60-100 PSI
• High-capacity magazine for reload time. Reliably drives staples at proper angle and depth.
• Non-marring base plates are adjustable for 1/2 to 3/4 inch hardwood floor installation.
• Durable plastic carrying case for tool, inclues mallet, oil, hex tools, o-rings and safety googles.

Hardwood Flooring Nailer for installing hardwood floors between 1/2 - 3/4 inches thick. Used by many contractors and DIY floor installers this tool works well for all skill levels. The sturdy long handle allows for great control and keeps you from breaking your back. The nail magazine holds 100 flooring nails, and nail length can vary between 1 1/2" to 2" depending on what you need. The air inlet is standard 1/4". Air consumption is low at 4.5 CFM and allows you to use a small compressor. Input pressure should be controlled between 60 and 100 PSI. With a little practice this tool will allow you to lay hundreds of square feet per day. Depending on the type of wood you will need to vary the input pressure. Bamboo is very hard and brittle and requires a low pressure to prevent damage. Teak and some other very dense hard woods will require 100 PSI. You should test on a piece of scrap plank to make sure you are getting good results. The hardwood flooring nailer is used by placing it on the edge of a piece of hardwood flooring. The included mallet is then used to strike the actuator and fire the cleat nail in. The most difficult part of the process is just moving the flooring nailer around. Include in the kit is a Carrying Case, Hardwood Flooring Nailer , Safety Glasses, Air Tool Oil, Base Plate, S3 Hex Key S4 Hex Key S5 Hex Key Wrench, and Instruction Manual.

Check price now

Porta-Nails 42660 16 Gauge 2-Inch Stainless Steel Flooring Nails (1,000 per Box)

Porta-Nails 42660 16 Gauge 2-Inch Stainless Steel Flooring Nails (1,000 per Box) Review

See more picture

Porta-Nails 42660 16 Gauge 2-Inch Stainless Steel Flooring Nails (1,000 per Box) Feature

• Stainless Steel nail for use with application requiring a non-corrosive nail
• Approved for use on ACQ treated materials
• Cupped point which virtually eliminates splitting even with very hard species.
• Well defined barbs to prevent the floor from moving
• 1000 nails will nail approximately 200 square feet of tongue and groove flooring

Stainless steel

Check price now

Hitachi N5009AF 15-1/2 Gauge Flooring Stapler

Hitachi N5009AF 15-1/2 Gauge Flooring Stapler Review

See more picture

Hitachi N5009AF 15-1/2 Gauge Flooring Stapler Feature

• Integrated safety protects the user and work piece by preventing accidental drives
• High capacity magazine reduces downtime by requiring fewer reloads
• Preferred seating system provides accurate placement of fasteners at the proper angle and depth
• High strength aluminum housing for less weight and greater durability
• Non-marring accessory shoes allow for driving in a variety of sizes, while preventing damage to the floor

The new N5009AF flooring stapler fires 15-1/2 gauge staples in 1-1/2 In. and 2 In. lengths for installing 1/2 In. and3/4 In. domestic solid wood flooring.

Check price now

Hardwood Flooring Nailer and Stapler Hardcore Tools®

Hardwood Flooring Nailer and Stapler Hardcore Tools® Review

See more picture

Hardwood Flooring Nailer and Stapler Hardcore Tools® Feature

• 2 in 1 Flooring Cleat Nailer / Stapler gun at fraction of the cost of a Bostitch Stapler!
• High speed pneumatic flooring cleat nailer/hardwood floor stapler lets you get the job done faster.
• We ONLY ship TOOLS inside USA via fedex ground. SAVE MONEY DO IT YOURSELF 4 CHEAPER!
• Color of tool may differ! QUALITY PRODUCTS @ QUALITY PRICES WHEN YOU SHOP WITH STERLINGTEK!!!
• Returns for UNUSED PRODUCT in ORIGINAL PACKAGING. MUST be within 7 DAYS from the date of PURCHASE.

*Own your own professional craftsman grade tool for less than the cost of one or two weeks of tool rental. *Do a professional installation of your beautiful hardwood flooring faster and easier. *Our high-speed hardwood flooring, 2 in 1 pneumatic (powered by air compressor) cleat nailer / stapler is designed to install tongue and groove flooring using 1"" to 2" Length L-shaped cleat nails or staples on flooring thickness 1/2"", 5/8"", 3/4"", or 25/32"". * Technical Information: -Minimum Operating Air Pressure: --60 PSI 4 bar Maximum Operating Air Pressure: 100 PSI --7 bar Staple Length Range: 1"" - 2"" 25.4 mm-50.8 mm -- Staple Size: 16 Guage Staple Capacity :92 L-shaped Nail Length Range: 1-1/2" to 2" 38.1 mm-50.8 mm L-shaped --Nail Size: 15-1/2 L-shaped Nail Capacity:100 Air Inlet:1/4 inch NPT 6.35 mm Air Consumption: 4.5 CFM 4.5 CFM *Package Includes: Carrying Case 2 in 1 Flooring Cleat Nailer -- Stapler Mallet --Safety Glasses --Air Tool Oil Base Plate --S3 Hex Key --S4 Hex Key -- S5 Hex Key Wrench --Special Instruction Manual *Operates with any standard compressor using pressure of 60 to 100 psi. **High-capacity magazine reduces reload time. **Precisely drives staples at proper angle and depth. QUALITY PRODUCTS @ QUALITY PRICES WHEN YOU SHOP WITH STERLINGTEK!!! The Hard Core Tools/SterlingTek name, images, and contents of this SterlingTek listing are protected by trademarks and copyrights. Copyright © 2011 SterlingTek.

Check price now

Factory-Reconditioned Bostitch U/MFN-201 Manual Flooring Cleat Nailer Kit

Factory-Reconditioned Bostitch U/MFN-201 Manual Flooring Cleat Nailer Kit Review

See more picture

Factory-Reconditioned Bostitch U/MFN-201 Manual Flooring Cleat Nailer Kit Feature

• Selectable drive mode to choose between single or multi-blow options
• Graphite mallet with ergonomic comfort grip
• Installs 1/2-Inch, 5/8-Inch and 3/4-Inch flooring
• Rubber bumpers protect pre-finished floors against marring
• Kit includes: Flooring Nailer, Mallet, Flooring Adaptors (for 1/2-Inch and 5/8-Inch flooring), carrying case and hex wrenches

Bostitch engineered the MFN-201 flooring cleat nailer for users that prefer to install flooring manually. As a result, the MFN-201 requires no compressor or hose when driving fasteners. Its thoughtful design protects delicate flooring while maximizing user comfort. The MFN-201 installs both pre-finished and unfinished flooring (thicknesses of 1/2-inch to 3/4-inch). Features: Selectable drive mode to choose between single or multi-blow options Graphite mallet with ergonomic comfort grip Installs 1/2, 5/8 and 3/4-inch thick flooring Rubber bumpers protect pre-finished floors against marring Drives Bostitch "L" shaped hardwood flooring cleats What's In The Box: Bostitch MFN-201R Manual Flooring Cleat Nailer Kit Mallet Flooring Adaptors (for 1/2- & 5/8-inch Flooring) Carrying Case Hex Wrenches

Check price now

Porta-Nailer 46196 1-inch by 18 Gauge 1/4-Inch Crown Staple (5,000 per Box)

Porta-Nailer 46196 1-inch by 18 Gauge 1/4-Inch Crown Staple (5,000 per Box) Review

See more picture

Porta-Nailer 46196 1-inch by 18 Gauge 1/4-Inch Crown Staple (5,000 per Box) Feature

• Accessory for 461 Flooring Stapler
• 1" 18ga 1/4" crown staple
• Multi-purpose

5,000 Pack, 18 Gauge, 1/4' Crown, 1' Staple, Use To Secure Engineered Flooring, Underlayment & General Purpose Stapling, For Use In Porta-Nails 461, True Value #705-796 & 461A Models.

Check price now

Bostitch CPACK300 3-Tool and Compressor Combo Kit

Bostitch CPACK300 3-Tool and Compressor Combo Kit Review

See more picture

Bostitch CPACK300 3-Tool and Compressor Combo Kit Feature

• CAP2000P-OF oil free air compressor: 2.8 CFM at 90 PSI with 150 max, 6-gallon reserve tank, impact-resistant shroud to protect gauges
• SB-1850BN Brad nailer: adjustable depth guide, tool-free adjustable exhaust and no mar tip; drives 18-gauge brads 5/8-inch to 2 inches in length
• SB-150SX finish stapler featuring bottom-load magazine, tool-free adjustable exhaust and no mar tip; drives 18-gauge 7/32-inch narrow crown finish staples
• SB-1664FN finish nailer features quick-release nose door, adjustable depth guide, tool-free adjustable exhaust and no mar tip; drives 16-gauge straight finish nails
• Accessories include: 1/4-inch by 40-feet PVC air hose with fittings; 1,000 1-1/4-inch brads; 1,000 1-Inch staples; 1,000 finish nails, tool lubricant and canvas carrying case

The Bostitch 3-Tool and Compressor Combo Kit bundles the 18-Gauge 2-Inch Brad Nailer, the 18-Gauge 1-1/2-Inch Narrow Crown Finish Stapler, and the 16-Gauge 2-1/2-Inch Straight Finish Nailer, along with the powerful 6-Gallon 2.0 HP (Peak) Oil-Free Compressor. This kit gives you the versatility you need for tackling a wide variety of finish and trim projects.

This kit includes a powerful oil-free compressor, 3 finish and trim tools, tool lubricant, finish nails, brad nails, staples, and a canvas tool bag to keep everything organized. View larger.

The Bostitch 3-Tool and Compressor Combo Kit offers tools with: No-mar tip protects work surface for smooth, damage free work Tool-free adjustable air exhaust systems for user comfort High magazine capacity for decreased reloads Tool-free adjustable depth guide for setting nails to desired depths quickly and conveniently (Finish Nailer & Brad Nailer)

The finish nailer is ideal for baseboards and window and door casings. View larger.

The brad nailer is handy for staircase and cabinetry applications. View larger.

The finish stapler is great for cabinet work, carpet laying, and upholstering furniture. View larger.

The compressor's impact-resistant shroud with integrated handle protects gauges from jobsite damage. View larger.

Pneumatic Fastening for Fast, Accurate Detail Work
Detail work comes in many shapes and sizes and requires you to use different types of materials. Choosing the right tool for each job is an essential part of making certain your finished products look their best. That's why this kit sets you up with three distinct pneumatic fastening tools.

Each of these well-balanced tools is designed to sit neatly in your hand, letting you maintain control and precision. And each offers a wide range of simple, intuitive features, from no-mar tips that protect your work surface to tool-free adjustable exhaust systems that direct air away from your face to keep you comfortable while you work.

Three Dependable Tools for Handling Tough Jobs
The included 16-Gauge Straight Finish Nailer offers a convenient, adjustable depth guide and a quick-release nose for fast jam clearing. It is designed for handling nails 1 to 2-1/2 inches long, making it a great pick for moldings and door and window casing applications. The nailer provides 300 in./lbs. of driving power, a magazine capacity of 100 nails, and weighs in at four pounds.

Ideal for everything from staircases to cabinetry applications, the included 18-Gauge Brad Nailer makes use of the adjustable depth guide to set nails to desired depths quickly and conveniently. Behind its fast, reliable performance is the ability to deliver 145 in./lbs. of driving power. This nailer handles 18-gauge brads from 5/8 to 2 inches and weighs just 2.7 pounds.

Also included in the kit is the 18-Gauge Narrow Crown Finish Stapler, because whether you're working with cabinetry, floor underlayment, or upholstering furniture, a stapler is the right tool for the job. This stapler utilizes 135 in./lbs. of drive power to secure 7/32-inch narrow crown staples, features a bottom-load magazine for fast loading and easy jam clearing, and weighs 2.6 pounds.

All three of these tools offer a magazine capacity of 100 fasteners, so you don't constantly have to stop and reload, and each one is backed by a manufacturer's 7 year limited warranty.

Durable Six-Gallon Oil-Free Compressor
Built to keep your tools running smoothly and reliably, the 2.0 HP (Peak) Compressor delivers 2.8 CFM at 90 PSI with a maximum operating pressure of 150 PSI for improved tool performance. This compressor's oil-free pump design requires less maintenance than traditional models, and its large, six-gallon reserve tank includes a ball-type drain valve for easy drainage at the end of each day. It also employs an impact-resistant composite shroud to protect important gauges from job-site damage.

Heavy-Duty Motor Operates Smoothly and Quietly
The compressor's 2.0 HP (Peak), 1.5 HP running motor features easy startup and an expert design that draws 12 Amps without tripping your circuit breakers, so work can be done hassle-free. And the compressor's operation acoustics run at a quiet 72 dBA, making it ideal for use in smaller or more populated areas. The compressor is backed by a 1 year warranty.

Unlike kits that leave you guessing what accessories you need to get started, this tool and compressor combo comes with a heavy-duty airline that includes the necessary fittings, along with 3,000 appropriate fasteners and a canvas case to help you keep everything organized.

What's in the Box
6-Gallon 2.0 HP (Peak) Oil-Free Compressor; 18-Gauge 2-Inch Brad Nailer; 18-Gauge 1-1/2-Inch Narrow Crown Finish Stapler; 16-Gauge 2-1/2-Inch Straight Finish Nailer; 1/4-inch x 40-foot PVC air hose with fittings; 1,000 2-inch 18-gauge brads; 1,000 1-inch 18-gauge staples; 1,000 2-inch 16-gauge straight finish nails; tool lubricant; and canvas tool bag.

Available Bostitch Fasteners:

For the Finish Nailer:	Model # SB16-1.25-1M SB16-1.5-1M SB16-1.75-1M SB16-2.00-1M SB16-2.5-1M	Description 16 ga. 1-1/4" Finish Nails - 1000 ct. 16 ga. 1-1/2" Finish Nails - 1000 ct. 16 ga. 1-3/4" Finish Nails - 1000 ct. 16 ga. 2" Finish Nails - 1000 ct. 16 ga. 2-1/2" Finish Nails - 1000 ct.
*2500 ct. sizes also available
For the Brad Nailer:	Model # BT1303B BT1309B BT1309B-1M BT1335B BT1335B-1M BT1340B BT1350B BT1350B-1M	Description 18 ga. 5/8" Brad Nail - 3000 ct. 18 ga. 1" Brad Nail - 3000 ct 18 ga. 1" Brad Nail - 1000 ct. 18 ga. 1-3/8" Brad Nail - 3000 ct. 18 ga. 1-3/8" Brad Nail - 1000 ct. 18 ga. 1-9/16" Brad Nail - 3000 ct. 18 ga. 2" Brad Nail - 3000 ct. 18 ga. 2" Brad Nail - 1000 ct.
*Additional sizes and 1000, 3000, & 5000 ct. also available
For the Finish Stapler:	Model # SX50353/4G SX50351G SX50351-3/16G SX50351-3/8G SX50351-1/2G	Description 18 ga. 3/4"x7/32" crown Finish Staples - 5000 ct. 18 ga. 1"x7/32" crown Finish Staples - 5000 ct. 18 ga. 1-3/16"x7/32" crown Finish Staples - 3000 ct. 18 ga. 1-3/8"x7/32" crown Finish Staples - 3000 ct. 18 ga. 1-1/2"x7/32" crown Finish Staples - 3000 ct.
*Additional sizes and 1000, 3000, & 5000 ct. also available

Includes 2.0 HP (Peak) Oil-Free Compressor - CAP2000P-OF, 2-in 18-Gauge Brad Nailer - SB-1850BN, 1-1/2-in 18-Gauge Finish Stapler - SB-150SX, 2-1/2-in 16-Gauge Straight Finish Nailer - SB-1664FN, 1/4-in x 40-ft Heavy Duty Airline With Fittings, (1,000) 1-1/4-in Brads, (1,000) 1-in Staples, (1,000) 2-in Straight Finish Nails, Tool Lubricant, Canvas Carrying Case

Check price now

Bostitch MIIIFN 1-1/2- to 2-Inch Pneumatic Flooring Nailer

Bostitch MIIIFN 1-1/2- to 2-Inch Pneumatic Flooring Nailer Review

See more picture

Bostitch MIIIFN 1-1/2- to 2-Inch Pneumatic Flooring Nailer Feature

• 1-1/2-inch to 2-inch pneumatic flooring nailer for driving L-shaped flooring cleats
• High-speed; extra-wide composite base; high-capacity magazine; 420 inch-pounds of driving power
• Constructed of aircraft-grade aluminum
• Includes rubber-tipped mallet
• 17-1/4 by 3-1/8 by 11-1/2; 11.2 pounds; 7-year limited warranty

The Bostitch MIIIFN Pneumatic Flooring Cleat Nailer lets you create professional-looking floors quickly and comfortably. Its high-speed pneumatic operation rapidly drives nails into both unfinished and pre-finished hardwood flooring, and its long-grip handle allows you to maintain a comfortable posture when working. Tackling prefinished flooring is no problem with the included adapter foot and the extra-wide base plates that drive staples exactly where you want them.

The Bostitch Pneumatic Flooring Cleat Nailer At a Glance: 420 in./lbs. of driving power High-speed, mallet-actuated operation Extra-wide base plate for stability and control Ergonomic design with elongated handle

1.5" to 2.0" L-shaped cleats are ideal for installing hardwood flooring. View larger.

Adaptor foot and FloorGuard graphite mallet provide stability and control. View larger.

Interchangeable base plates help you drive cleats at the proper angle and depth. View larger.

All the Power You Need to Get Jobs Done Quickly
Harness the power of compressed air and complete your flooring jobs quickly and easily. Just connect the Bostitch MIIIFN Pneumatic Flooring Cleat Nailer to your air compressor for 420 in/lbs of impact at 70-120 PSI. A manual strike will activate the firing action with a lightweight FloorGuard graphite mallet, and a 110-cleat magazine will keep you working without interruption.

Comfortable Design Keeps You in Control
Ergonomically designed for ease of use, the MIIIFN features an elongated handle that lets you work in a natural, comfortable position. For control, the extra-wide 1/2- and 3/4-inch interchangeable base plates sit flush against floor boards for stability, so you can drive cleats at the proper angle and depth every time. Additionally, a pre-finished floorboard adapter foot won't scuff or scratch floors during installation for a professional-grade look.

Lightweight, Durable Construction for Everyday Use
The MIIIFN Pneumatic Flooring Cleat Nailer's lightweight body and graphite FloorGuard mallet make this tool comfortable enough to wield all day without fatigue. Built for durability, this nailer will withstand the wear and tear of any jobsite.

The Bostitch MIIFN Pneumatic Flooring Cleat Nailer measures 3.13 x 11.5 x 17.25 inches (WxHxL) and weighs 11.2 pounds. It is covered by a seven-year limited warranty.

About Bostitch
Stanley-Bostitch manufactures top-quality, innovative fastening tools and fasteners for industrial, construction, and home-improvement applications. Products include pneumatic staplers and nailers; compressors; manual staplers and tackers; coil-fed screw systems; rivet tools; glue guns; a broad assortment of collated nails, screws, staples and specialty fasteners in a variety of materials and finishes; and carton-closing staplers--many of them industry firsts.

What's in the Box
Cleat nailer, FloorGuard graphite mallet, pre-finished-flooring adapter foot, and two base plates (1/2 inch and 3/4 inch).

Check price now