Saturday, June 30, 2012

2 in 1 Flooring Cleat Nailer / Stapler Wood Floor Nail Gun Stapler for Hardwood Flooring

1 comments



2 in 1 Flooring Cleat Nailer / Stapler Wood Floor Nail Gun Stapler for Hardwood Flooring Review




See more picture








2 in 1 Flooring Cleat Nailer / Stapler Wood Floor Nail Gun Stapler for Hardwood Flooring Feature


  • 2 in 1 Flooring Cleat Nailer / Stapler at fraction of the cost of a Bostitch Stapler!
  • Think of that beautiful hardwood floor you are about to install. Colors of tool may vary!
  • QUALITY PRODUCTS @ QUALITY PRICES WHEN YOU SHOP WITH STERLINGTEK!!!
  • We currently ONLY ship these TOOLS inside USA via fedex ground.
  • Returns for UNUSED PRODUCT in ORIGINAL PACKAGING. MUST be within 7 DAYS from the date of PURCHASE.



Our high-speed hardwood flooring,  2 in 1 pneumatic (powered by air compressor) cleat nailer / stapler is designed to install tongue and groove flooring using 1" to 2"  length L-shaped cleat nails or staples on flooring thickness 1/2", 5/8", 3/4", or 25/32". Technical Information: Minimum Operating Air Pressure: 60 PSI 4 bar Maximum Operating Air Pressure: 100 PSI 7 bar Staple Length Range: 1" - 2" 25.4 mm-50.8 mm Staple Size: 16 Guage Staple Capacity :92 L-shaped Nail Length Range:1-1/2" - 2"  38.1 mm-50.8 mm L-shaped Nail Size: 15-1/2 L-shaped Nail Capacity:100 Air Inlet:1/4 inch NPT 6.35 mm Air Consumption:4.5 CFM 4.5 CFM Package Includes: Carrying Case 2 in 1 Flooring Cleat Nailer / Stapler Mallet Safety Glasses Air Tool Oil Base Plate S3 Hex Key S4 Hex Key S5 Hex Key Wrench-Special Instruction  Manual
We all know that time is money.



Check price now


Friday, June 29, 2012

Superior Parts FN83A Aftermarket Donut Flush Nailer

0 comments



Superior Parts FN83A Aftermarket Donut Flush Nailer Review




See more picture








Superior Parts FN83A Aftermarket Donut Flush Nailer Feature


  • Will fit NR83A, NR83A2 & NR83AA framing guns
  • Great for Flush Nailing
  • Avoids Costly sidding/wood damage
  • Precision machined
  • Brand new in its original sealed package



This flush nailer fits the Hitachi NR83A2 and NR83A2S framing nailer. Also fits the Porter Cable FR350A framer.



Check price now


Thursday, June 28, 2012

Campbell Hausfeld CHN50399 2-in-1 Flooring Nailer and Stapler Kit

0 comments



Campbell Hausfeld CHN50399 2-in-1 Flooring Nailer and Stapler Kit Review




See more picture








Campbell Hausfeld CHN50399 2-in-1 Flooring Nailer and Stapler Kit Feature


  • The CH flooring nailer/stapler is the only do-it-yourself flooring nailer that shoots both L cleats and flooring staples from 1.5 to 2 inches
  • The lightweight design is 10 percent lighter than competitive models, which reduces fatigue and allows for easy portability
  • Install 5/8-in to 3/4-in prefinished or unfinished hardwood flooring
  • Secures a variety of woods from maple, oak, cherry and more
  • One year warranty



Includes 2-in-1 Flooring Nailer and Stapler Kit - CHN50399, Rubber Mallet, 1/4-in Air Plug, Adjustment Tools, (2) Flooring Shoe Plate Protectors, (1) Box of Flooring Cleats and Staples, Storage Case



Check price now


Wednesday, June 27, 2012

Bostitch FLN-150 1-1/2-Inch Flooring L-Nails, 1000-Per Box

0 comments



Bostitch FLN-150 1-1/2-Inch Flooring L-Nails, 1000-Per Box Review




See more picture








Bostitch FLN-150 1-1/2-Inch Flooring L-Nails, 1000-Per Box Feature


  • Ideal for large scale nailing projects
  • Pack of 1-1/2-inch L-shaped hardwood flooring nails
  • Coated finish protects against damage
  • For use with a wide variety of nailers
  • Package in box of 1,000, enough for 200-square-feet of flooring



FLOORING NAILS - Coated finish protets against damage. For use with Bostitch MIIIFN flooring cleat nailer and porter cable FCN200; Powernail 345 and 45; Primatech P210, H300, H330 and Q500; Senco SHF50, SHF15 and SHF10. 200 squared feet of flooring.



Check price now


Tuesday, June 26, 2012

Factory-Reconditioned Bostitch U/MFN200 Manual Flooring Cleat Nailer Kit

0 comments



Factory-Reconditioned Bostitch U/MFN200 Manual Flooring Cleat Nailer Kit Review




See more picture








Factory-Reconditioned Bostitch U/MFN200 Manual Flooring Cleat Nailer Kit Feature


  • Reconditioned Bostitch Products have a One-year warranty through the Bostitch factory or an authorized service center
  • Manual flooring mailer with 200-nail capacity magazine
  • Light, easy-to-use nailer drives L-shaped cleats with a single blow; wide foot design
  • Durable, lightweight aluminum; rubber bumper protects flooring
  • Includes white-faced rubber mallet



This is a reconditioned power tool. Reconditioned generally means that the tool has been returned to the manufacturer, who brings the tool back to like new condition. Some tools may contain cosmetic blemishes.


Ready to use straight out of the box, the Bostitch MFN200 factory-reconditioned 2-cleat manual flooring cleat nailer, comes along with a rubber mallet. Simply unpack, load, and strike to nail down and construct stable flooring. Ideal for the DIYer as well as the professional installer, this power cleat nailer drives 1-1/2- to 2-inch nails with minimal effort.



Gun it on hardwood or engineered floors and set the tongue-and-groove joint right for once and for all. The long-reach handle of this cleat nailer enhances the comfort. You need not bend every time to strike this nailer. The sturdy aluminum construction makes Bostitch MFN200 endure jobsite abuse.

The Bostitch MFN200 assures a jam-free operation and lets you smoothly nail an L-shaped serrated nail at every strike. The rubber bumper prevents the flooring from any sort of damage, leaving it neat and spotless. With a magazine capacity of 200 cleats you are freed from the effort of frequent reloading. The 9.5-pound cleat nailer is lightweight, can be easily ported at the job site, and stably drives a nail through 3/4-inch hardwood flooring. Includes: MFN200 cleat nailer
and rubber mallet.



Check price now


Monday, June 25, 2012

Porta-Nails 472 Portamatic S Hardwood Floor Stapler

0 comments



Porta-Nails 472 Portamatic S Hardwood Floor Stapler Review




See more picture








Porta-Nails 472 Portamatic S Hardwood Floor Stapler Feature


  • Nails 1/2" ,5/8" and 3/4" Flooring
  • Air chamber provides for rapid fire production
  • Includes Non Marring Mallet
  • Requires daily lubrication
  • Powder coated finish for durability



Portamatic, Hammerhead S Nailer, Designed For Superior Performance & Economy, The S Fires A 15--15-1/2 GA, 1/2" Crown Staple, Will Sink Staples Perfectly At 70-90 PSI, Comes With Mallet & Spare Parts Kit, Used For 1/2" Or 3/4" Flooring.



Check price now


Sunday, June 24, 2012

Bostitch LHF97125-2 Floor Runner Laminated Hardwood Flooring Stapler for 1/4-inch to 1/2-inch Flooring

0 comments



Bostitch LHF97125-2 Floor Runner Laminated Hardwood Flooring Stapler for 1/4-inch to 1/2-inch Flooring Review




See more picture








Bostitch LHF97125-2 Floor Runner Laminated Hardwood Flooring Stapler for 1/4-inch to 1/2-inch Flooring Feature


  • Laminated hardwood pneumatic flooring stapler for 1/4-inch to 1/2-inch flooring
  • Tool-free adjustable base; ultra-quiet rear exhaust
  • Magnesium housing for extreme durability; molded rubber grip
  • Tapping block-included
  • 10.13 by 8.25 by 3-inches; 2-1/2-pounds; 7-year limited warranty



The Bostitch LHF97125-2 20-Gauge Hardwood Flooring Stapler is a durable, lightweight tool that's ideal for installing hardwood and laminated tongue and groove flooring. This pneumatic stapler features tool-free adjustments and oil-free operation, so it's incredibly easy to use. And accepting 20-gauge staples, the LHF97125-2 is designed to prevent damage to your floors.


20-Gauge Hardwood
Flooring Stapler
At a Glance:
  • 20-gauge fastener helps prevent flooring damage
  • Tool-free foot adjusts from 1/4" to 1/2"
  • Magnesium construction for lightweight durability
  • Ultra-quiet rear exhaust directs air away from the user
  • Oil-free operation

The angled nose ensures accurate
staple placement. View larger.
The LHF97125-2 is compatible with
Bostitch SB97 staples with a crown
width of 3/16" and a length of 1".
Perfect for Engineered and Hardwood Flooring
At its optimum operating air pressure of 70 - 100 psi, the, the LHF97125-2 is able to drive staples into either hardwood or laminate flooring, at an overall force of 145 in./lbs.

And with tool-free foot adjustments from 1/4 inch to 1/2 inch, the LHF07125-2 makes it easy to dial in the right depth for your flooring material, whether it's engineered tongue and groove or hardwood.

20-Gauge Fastener Prevents Flooring Damage
The Bostitch LHF97125-2 helps prevent accidental damage to your floors because it utilizes 20-gauge staples, which have been shown to be the ideal size for installing laminate and hardwood flooring. And thanks to its angled nose, this tool will give you accurate staple placement. The LHF97125-2 is compatible with Bostitch SB97 staples with a crown width of 3/16 inch and a length of one inch.

Thanks to its angled nose, this tool will give you accurate staple placement. The LHF97125-2 is compatible with Bostitch SB97 staples with a crown width of 3/16 inch and a length of one inch.

Gets the Job Done Fast
With the ability to fire 100 nails per minute, this stapler will help you get the job done fast. What's more, sequential trip firing will ensure optimum precision and accuracy and will help eliminate accidental firing.

For even greater efficiency, the high-capacity magazine holds up to 100 staples, which means fewer refills during the job. Refilling the magazine is a quick task that takes a matter of seconds and requires no tools. Simply press the magazine release button, pull back the magazine, load the staples, and slide the magazine back into place. It's that easy!

Designed to Work for You
The Bostitch LHF97125-2 Hardwood Flooring Stapler is designed with you in mind. Constructed of magnesium, the stapler is durable and lightweight, so it's easy to handle. Its rubber grip makes it comfortable to hold on all-day jobs, and its quiet rear exhaust directs air away from you for added convenience. What's more, the LHF97125-2 features oil-free operation, so it's easy to maintain--with no messy oil stains or spills to deal with.

The LHF97125-2 measures 10.13 x 3.0 x 8.25 inches (LxWxH) and weighs 2-1/2 pounds. It is backed by a limited seven-year warranty.

About Bostitch
Stanley-Bostitch manufactures top-quality, innovative fastening tools and fasteners for industrial, construction, and home-improvement applications. Products include pneumatic staplers and nailers; compressors; manual staplers and tackers; coil-fed screw systems; rivet tools; glue guns; a broad assortment of collated nails, screws, staples and specialty fasteners in a variety of materials and finishes; as well as carton-closing staplers--many of them industry firsts.

What's in the Box
Bostitch LHF97125-2 Flooring Stapler






Check price now


Saturday, June 23, 2012

Hitachi NT65MA4 15 Gauge Angle Finish Nailer

0 comments



Hitachi NT65MA4 15 Gauge Angle Finish Nailer Review




See more picture








Hitachi NT65MA4 15 Gauge Angle Finish Nailer Feature


  • Integrated air duster: Clear away debris and saw dust with the on-board air duster. Simply press the button and clear the surface where you need to place the nail.
  • Tool free depth adjustment provides simplicity and flexibility when fastening various types of wood.
  • Selective actuation: A simple flip of the switch allows for either sequential or contact nailing. No additional parts or tools required.
  • Easy clear nose: Should a nail jam, the easy clear nose provides easy access to minimize disruption.
  • 360 degree adjustable exhaust: Limitless exhaust direction adjustment ensures no one gets blasted with debris.



NT65MA4 Features: -Integrated air duster can be used to clear away dust and debris from the work surface in preparation for nailing or gluing.-Tool less, easy to cleat nose for quick nail extraction should nail jam during use.-Selective actuation switch allows for either sequential or contact nailing with a simple flip of the switch, no tools or parts required.-360 fully adjustable exhaust portal direct air exhaust away from the user or work piece.-34 magazine angle allows the user to reach into corners or tight spaces with ease.-No mar tip protect the work surface from damage and can be removed if needed.-Rubber grip adds comfort and a secure hold.-Accepts 15 gauge nails ranging in length from 1-1/4'' to 2-1/2''. Color/Finish: -Finish nailer.-Tool less depth of drive nail adjusts for flush fastening into varying materials for improved control and professional finish.



Check price now


Friday, June 22, 2012

Pneumatic 2 in 1 hardwood floor nailer for HARDWOOD FLOORING 1-1/2-Inch to 2-Inch Hardcore Tools®

1 comments



Pneumatic 2 in 1 hardwood floor nailer for HARDWOOD FLOORING 1-1/2-Inch to 2-Inch Hardcore Tools® Review




See more picture








Pneumatic 2 in 1 hardwood floor nailer for HARDWOOD FLOORING 1-1/2-Inch to 2-Inch Hardcore Tools® Feature


  • 2 in 1 Flooring Cleat Nailer / Stapler gun at fraction of the cost of a Bostitch Stapler!
  • High speed pneumatic flooring cleat nailer/hardwood floor stapler lets you get the job done faster.
  • Operates with any standard compressor between 60-100 PSI
  • High-capacity magazine for reload time. Reliably drives staples at proper angle and depth.
  • Durable plastic carrying case for tool, inclues mallet, oil, hex tools, o-rings and safety googles.



Own your own professional craftsman grade tool for less than the cost of one or two weeks of tool rental. Do a professional installation of your beautiful hardwood flooring faster and easier. Our high-speed hardwood flooring, 2 in 1 pneumatic (powered by air compressor) cleat nailer / stapler is designed to install tongue and groove flooring using 1" to 2" length L-shaped cleat nails or staples on flooring thickness 1/2", 5/8", 3/4", or 25/32". Technical Information: Minimum Operating Air Pressure: 60 PSI 4 bar Maximum Operating Air Pressure: 100 PSI 7 bar Staple Length Range: 1" - 2" 25.4 mm-50.8 mm Staple Size: 16 Guage Staple Capacity :92 L-shaped Nail Length Range:1-1/2" - 2" 38.1 mm-50.8 mm L-shaped Nail Size: 15-1/2 L-shaped Nail Capacity:100 Air Inlet:1/4 inch NPT 6.35 mm Air Consumption:4.5 CFM 4.5 CFM Package Includes: Carrying Case 2 in 1 Flooring Cleat Nailer / Stapler Mallet Safety Glasses Air Tool Oil Base Plate S3 Hex Key S4 Hex Key S5 Hex Key Wrench-Special Instruction Manual.Operates with any standard compressor using pressure of 60 to 100 psi. High-capacity magazine reduces reload time. Precisely drives staples at proper angle and depth. QUALITY PRODUCTS @ QUALITY PRICES WHEN YOU SHOP WITH STERLINGTEK!!! The Hard Core Tools/SterlingTek name, images, and contents of this SterlingTek listing are protected by trademarks and copyrights. Copyright © 2008 SterlingTek.



Check price now


Thursday, June 21, 2012

Bostitch MIIIFS 1-1/2-Inch to 2-Inch Pneumatic Floor Stapler

0 comments



Bostitch MIIIFS 1-1/2-Inch to 2-Inch Pneumatic Floor Stapler Review




See more picture








Bostitch MIIIFS 1-1/2-Inch to 2-Inch Pneumatic Floor Stapler Feature


  • 1-1/2-inch to 2-inch pneumatic flooring stapler for driving flooring staples
  • High-speed, mallet-actuated operation; extra-wide composite base; 420-inch-pounds of driving power
  • Constructed of aircraft-grade aluminum;-includes rubber-tipped mallet and foot kit
  • This stapler is ideal when working with ½-inch to 3/4-inch finished or unfinished hardwood flooring
  • 15 by 3-1/8 by 3-1/4; 11.2-pounds; 7-year limited warranty



The Bostitch MIIIFS Pneumatic Floor Stapler lets you create professional-looking floors quickly and comfortably. Its high-speed pneumatic operation rapidly drives staples into both unfinished and prefinished hardwood flooring, and its long-grip handle allows you to maintain a comfortable posture when working. Tackling prefinished flooring is no problem with the included adapter foot and the extra-wide base plates that drive staples exactly where you want them.


The Bostitch MIIIFS
Pneumatic Floor Stapler
At a Glance:
  • 420 in./lbs. of driving power
  • High-speed, mallet-actuated operation
  • Extra-wide base plate for stability and control
  • Ergonomic design with elongated handle



Adaptor foot and FloorGuard graphite mallet provide stability and control. View larger.

1.5" to 2.0" staples are ideal for
0.5" to 0.75" hardwood flooring.
All the Power You Need to Get Jobs Done Quickly
Harness the power of compressed air and complete your stapling jobs quickly and easily. Just connect the Bostitch MIIIFS Pneumatic Floor Stapler to your air compressor for 420 in/lbs of impact at 70-120 PSI. A manual strike will activate the firing action with a lightweight FloorGuard graphite mallet, and a 92-staple magazine will keep you working without interruption.

Comfortable Design Keeps You in Control
Ergonomically designed for ease of use, the MIIIFS features an elongated handle that lets you work in a natural, comfortable position. For control, the extra-wide 1/2- and 3/4-inch interchangeable base plates sit flush against floor boards for stability, so you can drive staples at the proper depth every time. Additionally, a pre-finished floorboard adapter foot won't scuff or scratch floors during installation for a professional-grade result every time.

Lightweight, Durable Construction for Everyday Use
The MIIIFS Pneumatic Floor Stapler's lightweight body and graphite FloorGuard mallet make this tool comfortable enough to wield all day without fatigue. Built for durability, this stapler will withstand the wear and tear of any jobsite.

The Bostitch MIIFS Pneumatic Floor Stapler measures 3.13 x 14.8 x 17.25 inches (WxHxL) and weighs 11.2 pounds. It is covered by a seven-year limited warranty.

About Bostitch
Stanley-Bostitch manufactures premium-quality, innovative fastening tools and fasteners for industrial, construction, and home-improvement applications. Products include pneumatic staplers and nailers; compressors; manual staplers and tackers; coil-fed screw systems; rivet tools; glue guns; a broad assortment of collated nails, screws, staples and specialty fasteners in a variety of materials and finishes; and carton-closing staplers--many of them industry firsts.

What's in the Box
Stapler, FloorGuard graphite mallet, pre-finished-flooring adapter foot, and two base plates (1/2 inch and 3/4 inch).






Check price now


Wednesday, June 20, 2012

NuMax SFL618BR 3-in-1 Flooring Stapler/Nailer with White Rubber Mallet

0 comments



NuMax SFL618BR 3-in-1 Flooring Stapler/Nailer with White Rubber Mallet Review




See more picture








NuMax SFL618BR 3-in-1 Flooring Stapler/Nailer with White Rubber Mallet Feature


  • 1 Year Warranty
  • Uses staples, T-Cleats, and L-Cleats
  • White Rubber Mallet
  • Interchangeable Base Plates
  • Hardened Driver Blade



SFL618 Features: -Flooring nailer.-Anti-dust cap.-White rubber mallet.-One piece drive blade.-3-In-1 Design fastener system.-Ergonomically designed comfort grip. Includes: -Oil and wrenches included. Dimensions: -Dimensions: 21.25'' H x 14.25'' W x 6.5'' D. Warranty: -1 Year limited warranty.



Check price now


Tuesday, June 19, 2012

Porta-Nails 40225 Face Nail Shoe (404 Porta-Nailer)

0 comments



Porta-Nails 40225 Face Nail Shoe (404 Porta-Nailer) Review




See more picture








Porta-Nails 40225 Face Nail Shoe (404 Porta-Nailer) Feature


  • Accessory that converts 402 Porta-Nailer to a face nailer
  • Ideal for nailing the first and last few courses of flooring
  • Provides easy, convenient tool conversion
  • Features strong, durable construction
  • Weighs 2.7 pounds



For use with the Porta-Nailer. Install the face nail shoe on the Porta-Nailer and convert the nailer from driving nails at a 45 degree angle to a 90 degree. With the face nail shoe attached you can drive nail through the top surface of the flooring. This is known as face nailing. For use with the beginning few and last few courses of flooring when too close to the wall for blind nailing ( nailing through the tongue of the flooring). Can also be used for nailing sub-floor materials to joist.



Check price now


Monday, June 18, 2012

Grip-Rite GRTPN600 Palm Nailer

0 comments



Grip-Rite GRTPN600 Palm Nailer Review




See more picture








Grip-Rite GRTPN600 Palm Nailer Feature


  • Compact design
  • Lightweight and balanced at only 3.3 lbs.
  • Magnetic nose
  • Easy to actuate
  • Nail seats deeply for ease of use



GRTPN600 As durable as it is compact, this palm nailer is designed to handle your toughest applications. Big things come in small packages, and this powerful tool is no exception. The GRTPN600 is the ideal pneumatic palm nailer for compact spaces, joist hangers, ties, connector straps, anchors, framing, and both exterior and interior applications. Features: -Compact design -Lightweight and balanced at only 3.3 pounds -Magnetic nose -Easy to actuate -Uses a range of nail sizes 2'' to 6'' -Nail seats deeply for ease of use -Prevents damage from missed hammer blows -Includes: comfort glove, hex wrenches, tool oil, and male coupler -12-month limited warranty -Applications: compact spaces, joist hangers, ties, connector straps, anchors, framing, exterior and interior Specifications: -Firing mode: push (multi blow) -Operating pressure PSI: 60-120 -Fastener type: hand drive nails, loose nails -Fastener range: 2'' to 6'' -Weight: 3.3 pounds -Dimensions: 5.25'' H x 5.3'' L x 3.25'' W Specification Sheet: GRTPN600



Check price now


Sunday, June 17, 2012

Freeman PFBC940 4-in-1 Mini Flooring Nailer/Stapler using 1 5/8-Inch 18 Gauge Nails or Staplers

0 comments



Freeman PFBC940 4-in-1 Mini Flooring Nailer/Stapler using 1 5/8-Inch 18 Gauge Nails or Staplers Review




See more picture








Freeman PFBC940 4-in-1 Mini Flooring Nailer/Stapler using 1 5/8-Inch 18 Gauge Nails or Staplers Feature


  • Anodized aluminum magazine
  • Anodized aluminum cylinder
  • 360 Degree adjustable exhaust
  • 4 nailer in one unit
  • Tool-free depth adjustment



The Freeman PFBC940, 4-in-1 Mini Flooring Gun, has the ability to fasten Tongue and Groove flooring and various finishing projects. This nailer is ideal for 1/2-Inch and below engineered or solid tongue and groove flooring, also great for tacking down flooring while glue sets. The PFBC940 is extremely durable and ergonomically designed to provide extra comfort when working on your wood working projects. The PFBC940 quickly converts to a straight 18 gauge brad nailer which can be used for finish molding to complete your flooring project. This nailer/stapler is equipped with a comfort grip handle, 360 Degree adjustable exhaust, anodized aluminum cylinder, anodized aluminum magazine, air filter/anti-dust cap, tool-free depth adjustment and a reload indicator. The PFBC940 has an oil-free design that includes oil (which is not necessary; however, recommended), goggles and wrenches. Freeman Pneumatic nailers are manufactured under the strict guidelines to ensure professional-grade standards. Compatible Nails: 18 gauge glue collated brad nails and 1/4" crown staples from 5/8" - 1 5/8". Magazine Capacity: 100pcs.



Check price now